Get A Quote
Get A Quote

4 Drums On A Pallet Heater Jacket (4DPV-100)

  • Efficient heating and insulation system for 4 drums on a pallet.
  • Carbon-Graphite heating elements provide consistent, even heat on four sides.
  • Adjustable Thermostat (Inkbird 308).
  • Durable, washable and flame retardant.
  • Manufactured in Melbourne, Australia.

Made with pride in Australia using only the highest quality materials and components, used appropriately, your 4DPV-100 will give provide years of efficient, reliable service.

Your 4DPV-100 has a carbon graphite heating element which delivers wide-area, consistent even heating, making it ideal for heating large volumes of liquid or semi-solid product.

Get A Quote
image002image002
Operating Instructions & Specifications

Operating Instructions

Your 4DPV-100 is easy to fit and use. Follow these steps:-

  1. Place the insulated lid on top of the four drums.
  2. Zip the four sides to the top.
  3. With all four panels zipped to the lid, all that remains is to zip up the four corners and and fold down the corner flaps.
  4. Plug the four side panels into the Temperature Controller, and plug the unit into a 240V, RCD-protected outlet.

Experiment with temperature settings to achieve your desired viscosity, but once that viscosity is reached, the temperature should be turned down low, as maintaining the temperature requires far less energy than elevating the temperature. Like reducing the heat when boiling water to maintain a simmer.

Caution!

  • Your 4DPV-100 is an electrical appliance and needs to be handled with care.
  • Connect only to a power outlet protected by a Residual Current Device (RCD).
  • Your 4DPV-100 is subject to testing and tagging requirements as stipulated in AS/NZS 3760.
  • Do not use your 4DPV-100 for application other than that for which it is designed.
  • Do not use your 4DPV-100 if any part is damaged in any way. Return to manufacturer for repair.
  • Your 4DPV-100 is designed for indoor use only.
  • Do not lean anything against the drums while the 4DPV-100 is installed.
  • Do not leave your 4DV-100 running at maximum temperature once target viscosity has been reached.

Specifications

  • 240V 50Hz 1400W
  • Adjustable Temperature Controller (Inkbird 308)
  • Internal Element Temperature Regulation Thermostat 100°C
  • Abnormal Element Temperature Limiting thermal Fuse 144°C