Under-bottle Heater Pad (UHV-70)
- The Under-bottle Heater Pad is placed between the polyethylene bottle and the floor-pan of the IBC (Intermediate Bulk Container)
- Direct contact ensures efficient heat transfer.
- Ideal solution for decanting smaller quantities.
- Manufactured in Melbourne, Australia.
Made with pride in Australia using only the highest quality materials and components, used appropriately, your UHV-70 will give provide years of efficient, reliable service.
Your UHV-70 has a carbon graphite heating element which delivers wide-area, consistent even heating, making it ideal for heating large volumes of liquid or semi-solid product.
Operating Instructions & Specifications
Operating Instructions
Your UHV-70 is easy to fit and use. Follow these steps:-
- Insert the UHV-70 into the container, and plug into an RCD protected outlet.
- Place the bladder on top of the heater pad
- Fill the bladder
- Switch on at the outlet
Caution!
- Your UHV-70 is an electrical appliance and needs to be handled with care.
- Connect only to a power outlet protected by a Residual Current Device (RCD).
- Your UHV-70 is subject to testing and tagging requirements as stipulated in AS/NZS 3760.
- Do not use your UHV-70 with an empty bladder
- Do not use your UHV-70 for any application other than that for which it is designed.
- Do not use your UHV-70 if any part is damaged in any way. Return to manufacturer for repair.
- Your UHV-70 is designed for indoor use only.
Specifications
- 240V 50Hz 220W
- Internal Element Temperature Regulation Thermostat 70°C
- Abnormal Element Temperature Limiting thermal Fuse 112°C
- Size: 980 x 780 x 10mm