Tilt Cradle Drum Heater Jacket (TDH-100)
- Efficient heating and insulation for liquid and semi-solid products
- Sits horizontally on a tilt cradle
- Carbon-graphite heating elements provide consistent, even heat
- Adjustable Temperature Controller
- Heavy duty construction
- Durable, washable and flame retardant
- Manufactured in Melbourne, Australia
Made with pride in Australia using only the highest quality materials and components, used appropriately, your TDH-100 will give provide years of efficient, reliable service.
Your TDH-100 has a carbon graphite heating element which delivers wide-area, consistent even heating, making it ideal for heating large volumes of liquid or semi-solid product.
Operating Instructions
Your TDH-100 is easy to fit and use. Follow these steps:-
- Place the lid on top of the drum with the opening over the outlet
- Wrap the Heater Jacket around the drum and zip it to the top.
- Zip up the Heater Jacket
- Place the Tilt Cradle under the drum and tilt to the horizontal position.
- Zip on the bottom
- Plug the DHV-100 power cord into the Heating outlet of the included Inkbird Temperature Controller, and plug the Inkbird Temperature Controller into a 240V RCD protected outlet. For Inkbird Temperature Controller settings see their simple instructions on YouTube.
- Position the Inkbird probe just behind the jacket zip at the top
- Experiment with temperature settings to achieve your desired viscosity, but once that viscosity is reached, the temperature should be turned down low, as maintaining the temperature requires far less energy than elevating the temperature. Like reducing the heat when boiling water to maintain a simmer.
Caution!
Your TDH-100 is an electrical appliance and needs to be handled with care.
Connect only to a power outlet protected by a Residual Current Device (RCD).
Your TDH-100 is subject to testing and tagging requirements as stipulated in AS/NZS 3760.
Do not use your TDH-100 for application other than that for which it is designed.
Do not use your TDH-100 if any part is damaged in any way. Return to manufacturer for repair.
Your TDH-100 is designed for indoor use only.
Do not lean anything against the drum while the TDH-100 is installed.
Do not leave your TDH-100 running at maximum temperature once target viscosity has been reached.