Get A Quote
Get A Quote

IBC Heater Jacket (IHV-100)

  • Efficient heating and insulation for liquid and semi-solid products
  • Carbon-graphite heating elements provide consistent, even heat on four sides.
  • Adjustable Capillary Thermostat
  • Heavy Duty Construction
  • Durable, Washable and Flame retardant
  • Manufactured in Melbourne, Australia

Made with pride in Australia using only the highest quality materials and components, used appropriately, your IHV-100 will provide years of efficient, reliable service.

Your IHV-100 has a carbon graphite heating element which delivers wide-area, consistent even heating, making it ideal for heating large volumes of liquid or semi-solid product.

Get A Quote
View product in 3D
Operating Instructions & Specifications

Operating Instructions

Your IHV-100 is easy to fit and use. Follow these steps:-

  1. Place the insulated lid on top of the IBC, with the Temperature Controller oriented towards the front (outlet) side.
  2. Zip the four sides to the top. The two (wider) side panels are interchangeable. The front panel has the ‘cat flap’ to allow access to the outlet.
  3. With all four panels zipped to the lid, all that remains is to zip up the four corners and and fold down the corner flaps.
  4. Plug the four side panels into the Temperature Controller, and plug the unit into a 240V, RCD- protected outlet.

Experiment with temperature settings to achieve your desired viscosity, but once that viscosity is reached, the temperature should be turned down low, as maintaining the temperature requires far less energy than elevating the temperature. Like reducing the heat when boiling water to maintain a simmer.

Caution!

  • Your IHV-100 is an electrical appliance and needs to be handled with care.
  • Connect only to a power outlet protected by a Residual Current Device (RCD).
  • Your IHV-100 is subject to testing and tagging requirements as stipulated in AS/NZS 3760.
  • Do not use your IHV-100 for application other than that for which it is designed.
  • Do not use your IHV-100 if any part is damaged in any way. Return to manufacturer for repair.
  • Your IHV-100 is designed for indoor use only.
  • Do not lean anything against the IBC while the IHV-100 is installed.
  • Do not leave your IHV-100 running at maximum temperature once target viscosity has been reached.

Specifications

  • 240V 50Hz 1300W
  • Adjustable Capillary Thermostat 0°C -90°C
  • Internal Element Temperature Regulation Thermostat 100°C Abnormal Element Temperature Limiting thermal Fuse 144°C